Service

Epoxy Countertops DIY – How Do You Do It?

pros and cons of epoxy countertops

Before starting on your project you should know some of the pros and cons of epoxy countertops. This article will help you decide if the epoxy is right for your kitchen or not. Basically epoxy countertops provide a great look, but there are some disadvantages. So before going further make sure you know everything about epoxy countertops before beginning. There is a lot more to epoxy countertops than just making them look nice.

Epoxy Countertops Have a Very Long Life Span.

Pros Most importantly epoxy countertops have a very long life span, in fact many can outlive their owners. If they are well taken care of them will last a lifetime. Denver Epoxy Countertops cost much less than other countertops, which is another pro. There are different choices available that you can select from, which gives you a wide range of flexibility.

Con When starting a DIY project, or doing it yourself, make sure you do a thorough inspection of your surface area. This will prevent costly mistakes that could cost you money. Some epoxy countertops come with a test piece, which makes sure the resin countertops will work properly. If your test piece is not working properly then you need to make sure you have all of the parts required to fix the problem. You can see more on our Facebook Page.

Most DIYers will purchase an epoxy kit because it will usually only cost a few bucks. You can mix your own epoxy mixture or purchase it already mixed for you. Make sure you read the instructions carefully, if not you may end up wasting money on supplies that you did not plan on using. An epoxy kit is not hard to use, you just mix it in with your concrete and you will have a beautiful new bar top.

Things to Know in Cleaning Your Epoxy Countertops

Cleaning Your DIY Epoxy Countertops While your epoxy resin is curing you should clean your surface properly to remove all dust, debris, and stains. Use a soft brush or pad to clean the edges of your hardening surface. It is important to clean the surfaces with a very soft bristled cleaning pad, as if you harden the edges of your epoxy countertop kit with too much pressure they will become brittle and weaken the seal. If you want a really nice shine on your newly installed epoxy countertops, you may want to wait until it has completely cured and then sweep or use a wet vacuum to remove all of the dust.

Installing Your Denver countertops You will most likely need a drill bit or a screwdriver to install your new epoxy countertops. Once you have installed your new countertop, you will probably want to cover it with a protective sealant. If you are installing over already existing flooring, you will have to remove the existing floor before you can start laying your new epoxy resin. If you are going to be putting your epoxy countertops over concrete, you will also have to make sure that it is completely level.

Installing the Undermount Sink The majority of epoxy resin countertops kits come with a simple plastic ring to mount your undermount sink. Most times this ring will also include a bracket to secure the sink to the counter top. Some kits do not include the bracket, so you will have to add your own reinforcement. Once your sink is mounted to the resin countertop, it will be very difficult to remove it without damaging the resin material. The most common problem when removing the undermount sink is that it blocks the drain holes, but for most people this is an easy enough fix. Epoxy Countertops is located in Denver.

Installing the Second Layers After you have installed your epoxy resin you will have to apply a second coat to keep the moisture in. Usually the number one concern is moisture seeping into the underlayment. So, the very first thing you will want to do is mix a very fine grain sand paper in your mortar until it becomes very coarse. Then, using a spirit level to check the thickness of your first layer, carefully mix a second coat of sandpaper in the same grain. Continue in this fashion until you reach the desired thickness. After your first epoxy coating is dry, then you can easily pour your epoxy onto the sub-floor and let it set overnight.

To Top